 Über Soft™
Heavy Duty Water Softener This Über Soft™ water softener module features over 52,000 grain capacity (at 12 lbs/ft3 salt regeneration), latest demand metered control, cyclonic distribution system, integral chlorine generator, and jumbo sized brine tank. All these features together make a softener that really does the job! 
- 52,000 grain capacity for fewer regeneration cycles
- Demand metered control regenerates only when necessary, to supply continuous treated water with substantial salt and water savings.
- Cyclonic distribution system (see below)
- Integral chlorine generator module sanitizes the resin bed during each regeneration cycle. Chlorine is produced from the salt solution in the brine tank as it enters the softener.
- You will appreciate the over-sized brine tank that easily holds 150 lbs of salt pellets or those 50 lb salt blocks (without crushing your hands)
- Safety overflow fitting, automatic bypass during regeneration and operation on less than $2.00 a year of electricity (based on $0.67 per kilowatt hour) makes this a true performer. Comes standard with 1" copper sweat fittings.
- This would be a great module to build your own custom treatment system.
- Be sure to use pre-filter sediment module to prevent the softener from getting clogged.
This system also features the Cyclonic Distributor System™ providing higher flow rates, less pressure loss, improved treatment capacity, product flexibility, and water conservation.    
Standard Service
leaves 'dead zones' of
unused media in the
bed and promotes
channeling | Cyclonic Service
utilizes the entire
media bed. | Standard Backwash
lifts the bed. | Cyclonic Backwash
utilizes angled plate
slots to expand the
full bed and swirl
the media, resulting in
a more vigorous and
effective cleaning of
the entire media bed. |
|
